In the field of industrial weighing automation, the accuracy, reliability, and integration capability of a controller directly affect the operating efficiency and product quality of the entire production line. The JADEVER JCB‑T2 weighing transmitter indicator is a DIN‑rail‑mountable controller designed specifically for embedded installation in industrial cabinets. With its compact industrial‑grade aluminum housing, full weighing parameter calibration functions, and flexible control and communication interfaces, it provides a reliable solution for hopper weighing, automatic batching, and industrial weight data acquisition systems.
The JCB‑T2 employs a Δ‑Σ (Delta‑Sigma) A/D conversion technology, with an internal A/D resolution of 800,000 and a display resolution of 15,000 divisions. Its non‑linearity is better than 0.007% of full capacity, guaranteeing 15,000 verified divisions. The input sensitivity is 0.2 µV/division, and the input voltage range covers –2 mV to 20 mV. The load cell excitation voltage is DC 5V, supporting up to four 350Ω analog load cells in parallel. The input impedance is greater than 10×10⁶ Ω, ensuring stable acquisition of sensor signals.
The A/D conversion rate is configurable from 7.5 to 120 times per second (default 7.5 times per second), allowing users to flexibly balance speed and stability according to actual application needs. A 6‑digit LED display provides clear and intuitive readouts, suitable for various industrial field environments.
The JCB‑T2 is equipped with complete digital I/O terminals, featuring 2 output control channels and 2 input control channels. The two output channels can independently control discharge valves, feeding equipment, and other electrical components, making it ideal for multi‑material parallel batching automation. The two input channels support external trigger control, allowing connection to photoelectric sensors, push‑buttons, or other external signals to start, pause, or reset the weighing process.
This configuration means the JCB‑T2 is not just a weighing indicator, but also an intelligent controller with autonomous control capabilities, widely applicable in automatic batching systems, loss‑in‑weight feeders, quantitative packaging, and other industrial automation scenarios.
The JCB‑T2 offers two output interface configuration options, allowing users to select the most suitable one for their system requirements:
Option 1: Dual RS232 + Analog output
Option 2: RS485 + RS232 + Analog output
The RS485 interface supports the standard MODBUS‑RTU protocol, making it easy to operate as a slave device in a bus network, communicating with host controllers such as industrial PCs, PLCs, or HMIs. The dual‑port design enables the JCB‑T2 to connect simultaneously to an upper computer and other peripheral devices, enabling real‑time weighing data transmission and remote monitoring.
The analog output supports either voltage or current signal types, facilitating direct connection to frequency inverters, PID controllers, recorders, and other analog devices, further expanding its applicability in process control.
The JCB‑T2 features a rugged industrial‑grade aluminum housing, providing excellent heat dissipation and electromagnetic interference resistance. Its DIN‑rail mounting design allows quick and secure installation in standard industrial electrical cabinets, saving valuable panel space and reducing system integration complexity and cost.
The power supply accepts a wide DC 12‑48V input range, and under normal weighing conditions, power consumption is only approximately 600 mW – low heat generation and energy‑efficient. The operating temperature range is –10 to 40°C, with a maximum humidity of 85%, making it adaptable to most industrial environments.
Based on the above performance characteristics, the JCB‑T2 is suitable for the following typical industrial applications:
Hopper / tank weighing: Monitoring real‑time material weight in hoppers using up to four analog load cells.
Automatic batching systems: Utilizing the 2 output channels to control sequential or parallel feeding of multiple materials.
Weight display and data acquisition: Transmitting weighing data to an industrial PC via RS232/RS485 for centralized production data management and traceability.
Quantitative packaging and filling control: Combining external trigger inputs and output controls to achieve set‑point weighing and automatic discharge.
The JCB‑T2 weighing transmitter indicator delivers high‑precision weighing, flexible control and communication capabilities, and a compact DIN‑rail design, offering a reliable and easily integrated solution for industrial weighing automation. Whether for new production lines or upgrading existing equipment, the JCB‑T2 effectively meets the dual demands of accurate weighing and intelligent control on the shop floor.
Поддерживается сеть IPv6 
